the flexible connection to the kvm-tec switching system
the flexible connection to the kvm-tec switching system

kvm-tec Gateway2go

App de Windows para obtener imágenes en vivo desde el sistema de switches & Remote Workplaces

más información, desplácese hacia abajo

  • La conexión flexible al sistema de switches KVM de kvm-tec
  • Innovadora aplicación de usuario en tiempo real para todos los dispositivos portátiles o de sobremesa con Windows 10


Short Tutorial

 Gateway2go para lugares de trabajo remotos y acceso al sistema de conmutación

El ancho de banda requerido se reduce mediante una gestión especial de ancho de banda y, por lo tanto, es posible trabajar a distancia en tiempo casi real. Gateway2 go está conectado a Internet a través de un túnel VPN y, por lo tanto, puede conectarse desde la estación de trabajo remota a cualquier PC del sistema de conmutación matricial.  
Sistema operativo Windows 10, ancho de banda 70Mbit/s para el trabajo de escritorio, 500 Mbit/ para una reproducción de vídeo sin problemas

Modelo de licencia para lugares de trabajo remotos
Las licencias mensuales se reservan a petición, lo que hace que el Lugar de Trabajo Remoto sea muy rentable y cubra eficientemente las horas punta.


  • App de Windows para obtener imágenes en vivo desde el sistema de switches
  • No requiere hardware adicional.


Confiamos en la transparencia en el KVM High performance world

Volumen de suministro

Windows APP con código de desbloqueo para su instalación en un PC


Hoja de datos Gateway2go


Manual Gateway2go


Why won’t the streaming window appear after selecting the desired extender and clicking the connect button?

There are 4 possibilities to consider why the stream won’t show up:

1. In the “List” section of the switching manager, there usually are a couple of checkboxes along with the name of the device. To make sure Gateway2go actually receives the information it needs, check the boxes “USB HID” and “Video” for both Gateway2go and the device you want to connect to.

2. In the “List” section of the switching manager, be sure to check if the device you are trying to connect to is still connected to the switching manager

3. Your firewall may interfere with the connection, if so, you may want to turn it off during use of the application. To turn it off you have to open up “Windows Defender Firewall” (press the windows button on your keyboard and type “firewall” into the search bar) and click on “Turn Windows Defender Firewall on or off”, there you are able to turn your firewall off or on. We highly recommend you turn the firewall on again after you finished your work with Gateway2go.

4. You may want to click “Refresh” if you want to connect to a different extender after streaming to another, though this should not be necessary.

Why won’t my product key be approved by the application?

If the registration of your product was successful, the application will close. Upon restarting Gateway2go, it will now be registered. If you already tried to register your product and the registration key does not match, first check if the MAC address you provided your sales partner fits the PC you trying to register Gateway2go on. If it does, please contact your sales partner, there may be an issue regarding key generation.

What is a decoder thread?

A decoder thread decodes the video packages received from the extender, without them there won’t be a picture in the streaming window. The number of decoder threads corelates to how fast the stream updates the picture i.e. how smooth the streaming quality is. Set the number of decoder threads to at least the amount of physical cores of the CPU you run Gateway2go on. You could also check in the Task Manager if there is still room for one or two more threads until CPU performance reaches the ceiling, proceed at your discretion.Remember to set the number of decoder threads before connecting to a extender, the box will be disabled after clicking “Connect”, until you restart the application


Why does Gateway2go suddenly close after a while?

Gateway2go runs as a demo if it is not registered, which means it closes after 10 minutes of use. Register your product in the settings window. If you already tried to register and the product key does not match go back to the question “Why won’t my product key be approved by the application?”.


Why does the login window appear after I entered my user name and password?

The login window will appear every time a user name and password are required to connect to the switching manager. If the wrong user name and password were sent to the switching manager, it will reappear as long as the login data is incorrect. Make sure you are entering the correct user name and password.

Part Number








Order Number





Descripción breve

kvm-tec gateway2go


kvm-tec Gateway2go - monthly licence


…donde se inventan nuestras innovaciones técnicas
…donde se inventan nuestras innovaciones técnicas

powered by wow! solution