- Dual DVI-D/ USB2.0 Extender over IP
- dual in copper
- max resolution 1920 x 1200 @60 Hz
- max distance 100m/328ft
- only one cable for USB and two cables for video
- Sound embedded
- full HD videos in real time
- for point to point or Matrix Switching System (Switch Layer 3)
smartEASY dual is a highly optimized KVM Extender over IP for distances up to 100m/328ft at a resolution of 1920x1200@60Hz and is available in copper. smartEASY convinces with an ultra-flat housing - 4 dual in 1RU, embedded sound included and the KVM Extender over IP is compatible with standard network components.
The perfect video compression enables the low latency <1.38ms and thus a delay-free transmission. USB and video are transmitted via a CAT5e/6/7 cable.
The perfect video compression enables the low latency <1.38ms and therefore a delay-free transmission. USB and video are transmitted via a CAT5e/6/7 cable.
Feature - Freeze last image - in case of a signal failure the last saved image is displayed in a red frame.
USB 2.0 in house development
The in-house developed USB 2.0 implementation supports typical USB devices like touch screens, sound modules, printers and alike components. On top the support for memory devices such as thumb-drives and USB HDDs can be enabled or disabled on demand providing another layer of security. And of course keyboards and mice are supported, too.
Smarteasy locals and remotes are small form factor devices. They fit easily underneath a desk and up to four units can be mounted on a 19”- shelf. Single-sided interface orientation provides easy access in setup and service. They provide two power inputs for redundant feeding. MAXflex is designed fanless and with that noiseless for silent and ergonomic work spaces
EASYline allows limiting the transmission bandwidth limitation in nine fix steps. This allows to managed network utilization by reducing operational performance. Depending on the use case, this might not even have a recognizable impact (e.g. static image monitoring)
Kvm-tec upgrades fOr SMARTEASY DUAL
(already pre-installed and activatable)
- USB Memory
EASY SWITCHING WITHOUT SWITCH
with frontbridging, 2 Local KVM Extenders can be bridged to 1 remote dual KVM Extender (2 network sockets) and thus one or two monitors can simultaneously display the contents of the PCs with different images and can be operated either right or left.
2 local single Unit + 1 remote dual Unit = Bridging on 1 or 2 screens
EASY CROSS MOVE
IN BRDGING MODE
without switch, both PCs can be operated with one mouse and one keyboard
2 local Units + 1 remote Unit = Easy Cross Move with 1 keyboard & 1 mouse
In USB transparent the PC can be changed with a shortcut.
In Emulation Mode uninterrupted switching between the PCs with the mouse.