If one port fails, there is NO black screen as the other port takes over
something is wrong - immediate notification
Since there is almost no noticeable difference between compressed and uncompressed with kvm-tec, the link failure could also be easily overlooked - therefore instant notification
Hot hot - it gets too hot
If the ambient temperature becomes too hot for the kvm-tec Extender, which has passive cooling, it will sound an alarm and immediately notify that the temperature in the environment is too high and needs to be remedied.
Never powerless - failure of a power supply
Not good! But also here the extender immediately sounds an alarm and notifies that the power supply has failed.
Who changed what here? - Failure or unplugging of an Extender
If one of the endpoints in a system fails or is disconnected, then the Switching Manager raises an alarm and sends a notification.
Display Data Channel
The Display Data Channel is a serial communication interface between the display and the PC that enables data exchange via the display cable and allows the operating system to automatically install and configure the display driver
The Extender is a Teamplayer – DDC-CI
DDC -CI (Displaydatachannel - Command Interface) the PC can request the monitor via the Extender whether it is switched on or off, monitor type and serial number, request and adjust brightness, change volume.
The APP (Click Monitor DDC ) is installed on the PC and the data are displayed. As of Q3, the DDC-CI information can also be queried via the Switching Manager
A very useful feature for Applications with Digital Signage available for media4connect and Ultraline
Description Part Nr rec. RRP
Alarm system via SMS or email
for redundant uncompressed transmission
too hot ambient temperature
failure of an extender
Alerting package up to 100 endpoints 4016 1000.-€
Alerting package up to 1000 endpoints 4017 5000.-€
Health Status - DDC-CI
up to 100 endpoints 4018 600.-€
up to 1000 endpoints 4019 1500.-€